Air-to-water heat pump, monoblock Crystal OPAL CLM-16AP, 16 kW, single-phase

Heat pump air – water MONOBLOK

The monobloc type heat pump is a compact system for external installation, which means that the space inside remains free. It is suitable for installation in any type of property, especially places where space is limited.

Through the Air-Water heat pump technology, the energy from the outside air is transformed into heat, which is used to heat your home and produce DHW. The technology is also used for cooling. The main advantage is that up to 75% of the required energy is extracted from the outside air.

Many applications in one system

Heating, cooling and DHW with just one system.

* When selecting two different temperatures, which requires control of 2 zones, the set water temperature in heating mode must be higher.
• If terminal devices are connected simultaneously for heating and cooling, the installation of a 2-way valve on the heating circuit is required, which is controlled by the heat pump and stops the flow of water in cooling mode

Freon R32(HFC-32) with 0 ODP and 675GWP, low carbon content and no harm to the ozone layer. R32 contributes to environmental protection by reducing CO2 emissions by 77%, compared to R410a.

Built-in hydraulic module

With the monobloc type heat pump, the indoor and outdoor units are combined into one unit. There are no refrigeration connections, as the monobloc is connected only and only by water. At the same time, components such as plate heat exchanger, expansion tank and water pump are pre-included in the kit.

Highly efficient compressor

Thanks to a highly efficient compressor, a heat exchanger with a large area and a precise control system, the heat pump maintains a high temperature, even at low outside temperatures.

High performance components

DC inverter compressor. Pressure coefficient up to 13. Good performance at low temperatures.	Brushless DC motor with high efficiency and low noise levels.	Freon cooling of the board Ensures the main board operates within appropriate temperature limits to improve its reliability.
Highly efficient plate heat exchanger. Excellently designed air flows, resistant to high temperatures and pressure.	TRV Precisely controls and regulates the flow of refrigerant, 0-480 pulses.	Inverter Water Pump High efficiency inverter water pump, operating at high pressure up to 9 m.

Multiple defenses

The unit has a number of built-in protections to ensure the long-term stable and safe operation of the entire heat pump system.

Current protection System over-amperage protection Voltage protection High voltage protection Low voltage protection Pressure protection High pressure protection Low pressure protection

Overheating protection Compressor outlet temperature Condenser temperature IPM module overheating protection Frost protection Temp sensor. on the water Temp sensor. of freon

High water temperature

The monobloc heat pump works in a wide range of outdoor temperatures, from -25°C to 43°C. Provides hot water for heating/DHW with a temperature of up to 62°C throughout the year. It is extremely suitable for use in residential and commercial premises.

Silent night mode

Through a simple setting from the controller, a time can be set for the heat pump to enter quiet operation mode, where the noise level is reduced to 3 dB(A).

Energy labels and certificates

As the main energy-efficient and reliable heat pump, the monobloc has received a series of certificates that meet the needs of various markets.

Control

Air-to-water heat pumps, monobloc type, have 3 different ways to control the unit to meet specific customer requirements.

Wi-Fi wired control with touch screen

• Mode control
• Weekly timer function
• Electric heater
• Forced defrosting
• Sterilization
• Frost protection
• Wi-Fi control

Dry contact

The heat pump retains 3 standard dry contacts and 4 custom dry contacts, as well as 3 standard contact terminals and 3 custom 230 V terminals.

Modbus control

The board of the outdoor unit has a built-in port for Modbus control, which allows it to be connected to an external control or a computer, using the Modbus protocol.

Dimensions of the device

Model	Number of phases	Fan	A (mm)	B (mm)	C (mm)	D (mm)	Weight (kg)
16 kW	1 Ph	Double	1302	1517	370	465	165.5

Technical data

Technical parameters in heating mode
A+7°C; W30/35°C	Power/COP	kW/COP	16.00/4.60
A+2°C; W30/35°C	Power/COP	kW/COP	14.50/3.30
A-7°C; W30/35°C	Power/COP	kW/COP	13.30/2.70
A+7°C; W40/45°C	Power/COP	kW/COP	16.00/3.50
A+7°C; W47/55°C	Power/COP	kW/COP	13.50/2.70
A+2°C; W47/55°C	Power/COP	kW/COP	13.50/2.35
A-7°C; W47/55°C	Power/COP	kW/COP	11.50/1.95
A+7°C; W35°C (ErP-temperate climate)	Prated-NET/SCOP-NET		14.79/4.78
	ηs 30/35-NET	%	188%
	Efficiency class 30/35		A+++
A+7°C; W55°C (ErP-temperate climate)	Prated-NET/SCOP-NET		13.06/3.36
	ηs 47/55-NET	%	131%
	Energy class 47/55		A++
Technical parameters in cooling mode
A+35°C; W23/18°C	Power	kW	14.30
	EER/SEER		3.80/6.14
	ηs 23/18	%	243%
A+35°C; W12/7°C	Power	kW	14.00
	EER/SEER		2.65/5.06
	ηs 23/18	%	199%
Technical data
Sound characteristics	Sound power	dB(A)	70
	Sound pressure	dB(A)	58
Dimensions	LxWxH	mm	1302x465x1517
Weight	Weight	kg	167.7
Freon	Type/quantity	kg	R32/2.6
Water connections	Inlet diameter pipes	inch	1.25
	Diameter ext. pipes	inch	1.25

Documents

Catalogue

Price list of air-to-water inverter heat pumps Crystal OPAL, monoblock

DOWNLOAD